The DC-50 dehumidifiers has a resistive heater and needs a 3-phase supply. This unit is the right choice when you need to re-circulate air in a room and there is a large difference between moisture content of the air in a room and the air outside. As an option it is possible to control the capacity with a 0-10Vdc signal, for example from regulator EH3.
Dehumidifier Consorb DC-50R:
- Highly efficient D-MAX rotor
- No desiccant carry-over
- Stainless steel chassis
- Easy to maintain
- Long lifetime
The Consorb principle is normally used at low regeneration temperatures, e.g. if you have surplus heat or when dehumidifying very damp air. The Consorb principle is also good when there is a large difference in moisture content between process and regeneration air inletsSection of a dehumidifier rotor from Seibu Giken. The high number of channels means that moisture is adsorbed with extra efficiency.
Dehumidifier Consorb DC-50R technical data:
| Dehumidifier model | DC-50R |
| Nominal capacity (lbs/h) | 6.6 |
| Dry air flow (CFM) | 320 |
| Static pressure (In w.c) | 0.6 |
| Wet air flow (CFM) | 90 |
| Static pressure (In w.c) | 0.4 |
| Heater power (kW) | 5.0 |
| Maximum electric consumption (kW) | 7.6 |
| Supply fuse 3 x 480V/60 Hz (A) | 16 |
| Weight (lbs) | 140 |
