Dehumidifier Recusorb RL-61/ICE/L/L ICE On both process and regen sides there are F7 panel filters as standard equipment. The chassis is in stainless steel with all components inside. For control, we can panel mount regulator EH3 or humidistat EH4 and even have the unit with PLC C4 with Modbus communication and graphic screen with touch function. There are possibilities for VSD’s on both fans, linear capacity control and filter guards.
Dehumidifier Dehumidifier Recusorb RL-61/ICE/L/L ICE:
- Excellent performance in all climates
- Built-in heat recovery
- Duct connection
- Merv 13 filter
- Stainless steel chassis and panels
- Highly efficient D-MAX rotor
- Options
- Frequency inverter to control airflows
- Filter guard
- Linear capacity control
- Panel mounted humidity / dew point controller
- Insulated inlets to help prevent condensation
Recusorb R operates using integrated heat recycling. During the rotor’s regeneration (green), heat is absorbed, and then recycled in the “purge zone”, where incoming air is pre-heated and partly dehumidified. Energy consumption falls and the dry air becomes both drier and cooler compared to other sorption dehumidifiers.Section of a dehumidifier rotor from Seibu Giken. The high number of channels means that moisture is adsorbed with extra efficiency.
Dehumidifier Recusorb RL-61/ICE/L/L ICE technical data:
| Dehumidifier model | RL-61 | RL-61 ICE |
RL-61L | RL-61L ICE |
| Nominal capacity (lbs/h) | 17 | 18 | 24 | 25 |
| Dry air flow (CFM) | 760 | 940 | 1100 | 1200 |
| Static pressure at disposal (in w.c) | 0.8 | 1.6 | 0.8 | 1.2 |
| Wet air flow (CFM) | 160 | 160 | 250 | 250 |
| Static pressure at disposal (in w.c) | 1.2 | 1.2 | 1.2 | 1.2 |
| Heater power (kW) | 9 | 9 | 13.5 | 13.5 |
| Total power (kW) | 10 | 11 | 16 | 17 |
| Full load current 480V/60Hz (A) | 16 | 16 | 25 | 25 |
| Weight (lbs) | 286 | 286 | 290 | 290 |
