Fan coil Low-Static Mini-Horizontal (MH)
COOLING CAPACITY
Williams Mini horizontal fan coils have been rated in accordance with AHRI Standard 440-2005 for room fan-coil air-conditioners and are certified by AHRI to meet the following product performance ratings:
MH Mini-Horizontal
Notes: 1) Based on 80°F DB and 67°F WB EAT, 45°F EWT, 10°F temperature rise, high fan speed. Motor voltage 115/1/60 power source. Air flow under dry coil conditions. Water pressure drops shown in feet of water.
Features
100 CFM
Manufactured of heavy-gauge galvanized steel and insulated with 1/2" thick, over three-pound density, neoprene-coated fiberglass
Designed for smaller individual rooms in hot humid or extremely cold climates
Ideal for applications requiring 100% outside air for dehumidification, or areas requiring preheat/reheat
Blow-through design
Coils are manufactured of copper tube with aluminum fins and are 100% underwater pressure tested to 350 PSI with a 300 PSI working pressure
Single-speed, 115/1/60 motor with quick-connect plug
Galvanized drain pan is finished with a powder-coated epoxy, 1/8" thick insulation and features primary and secondary drain connections
One-inch duct collar on return- and supply-air openings
Individually tagged, crated and shipped as scheduled for installation
ETL and AHRI certified; 100% factory tested
Options
Systems
- DX
- Chilled-Water
- Hot-Water
- Electric Resistance
- Steam In any combination of the above
Insulation
- Fiberglass
- Foil-face
- Elastomeric
Coils
- Copper fins/tubes
- Phenolic-coated
- Stainless-steel end plates
- Right, left or opposite-end connections
- Freeze protection
- Custom fin spacing
Drain Pains
- Stainless-steel
- Extended
- Drip tray
- Condensate float switch
- Condensate pumps
Cabinets
- Marine duty
Electrical
- Motors
- 115, 208, 277
- Single or three phase
- 50 or 60Hz
- Line or low voltage
- Disconnects
- Fused
- Non-fused
- Condensate float switch
- Condensate pumps
- Thermostats
- UV Light
- Controls
- Flow Control
